Wart Removal - Simple Steps for Success

Step 1: Prepare the Wart

  • Slightly moisten the wart. Using a cotton swab (Q-Tip) is effective for this purpose.

Step 2: Activate the Device

  • Turn on the unit.
  • Hold the probe and gently apply the tip to the center of the wart.
  • Keep it in place for three continuous minutes.
    • You might feel a tingling sensation after about a minute. This sensation, if it occurs, usually fades by the second minute.
    • Ensure you maintain contact for the full three minutes for optimal results.

Step 3: Post-Treatment

  • Immediately after treatment, the wart may not look different.
  • Over the next couple of weeks, your body will regenerate new skin to replace the treated wart.
  • For warts larger than 1/4 inch (6mm) in diameter, you may need to treat each half separately.

Skin Tag Treatment

  • Place the probe tip at the base of the skin tag where it meets the body.
  • A single three-minute treatment is usually sufficient.

Battery Information

  • The unit comes with a battery installed.
  • Replacement batteries are easily obtainable if needed.

Important Warnings

  • Do not use if you have a pacemaker.
  • Avoid using around the eyes or on the eyelids.

Satisfaction Guarantee

We are committed to your satisfaction and are always available to assist you in achieving the best results with our product. If the device does not meet your needs, you may return it for a full refund.

Back to blog